|
This series have below strongpoint contrast with congener products: 1.Use high bit rate floating point unit (FPU), high calculate precision. Now most of the congener products use 40 bits flxed point machine, only hace midding precision, But AODA processor use 64 bits floating point unit. Professional only need to check attached form will know the quality difference at noce,(attached contrast from between two ICs) 2.Sampling frequency is double of most congener products, sound more nicety and less diatortion. Now most of the congener products use 48 KHz samping frequency, this frequency is not enough for professional occasion. AODA products use 96KHz samping frequency. 3.Easy to operate All the function can be set in the panel when it use by itslef, It can also controlled by computer when use the software attaced. Use USB or RS-485 connection control in close quarters. Use RS-485 connection control in far quarters. It can control maximum 250 pcs products. maximum distance 1000 meter (depend on differencce condition) 4.Easy to OEM ,ODM OEM, ODM can change the program and panel design according to requirement, Can also add IC card function, easy to user work in speaker manufactory, the speaker manufactory only need to set the specifciation of the speaker and save into the IC card, then use very easy. |
型号 Model | DSP-4X8 |
〖1〗System Setup | |
1/ device id set | |
2/ Password Setup | |
3/ power on set（All Mute / Keep in last state） | |
4/ backlight set（Keep On / 10s ） | |
5/ System information | |
〖2〗Input channel option： | |
1 / Mute：every channel have input mute（ON/OFF） | |
2 / Delay：longest delay 1000 ms | |
3 / Polarity： Pol (+) or Pol (-) | |
4 / Parameter Equalizer：every channel can set 6 parameter EQ（EQ—EQ6） | |
In Parameter | |
Frequency point：20Hz-20HHz | |
Bandwidth：0.05 ~ 3 Oct/w | |
Gain：-20dB ~ +20dB | |
〖3〗Output channel function option： | |
1/ Input choice：Each output can choose difference input channel（A , B, C, D channel or non channel），Each output can also choose difference channel assemble. | |
2/ Mute：each channel have output mute function，MUTE（ON/OFF） | |
3/ Output Gain：-12dB ~ +12dB Step distance 0.1dB | |
4/ Output delay：longest delay 1000 ms, can display in the computer by M or Ft. | |
5/ Polarity： Pol (+) or Pol (-) | |
6/ Crossover filter type：Link-Ril / Buttworth / Bessec | |
Frequency point：20Hz ~ 20KHz | |
Slope：12dB、18dB、24dB、48dB | |
7/ Limiter： | |
Threshold：-20dBu ~ 20dBu | |
Attack：0.3ms-100ms | |
Release : can be set to start time’s 2, 4 , 6, 8 , 16 or 32 times | |
8/ Parameter Equalizer：in Paramerer | |
Frequency point: 20Hz ~ 20KHz | |
Bandwidth：0.05 ~ 3 Oct/w | |
Gain：-20dB~+20dB | |
In Lo-Shelf and Hi-Shelf | |
Frequency point：20Hz ~ 20KHz | |
Gain: -20dB~+20dB | |
Slope：6dB、12dB | |
〖4〗Key-Press function | |
1/ X-Over: Enter high-pass low-pass adjust(useful when adjust output channel, inefficacy when adjust input channel) | |
2/ Eq: Enter equalizer adjust. | |
3/ Dynamics: Enter limiter adjust(useful when adjust output channel, inefficacy when adjust input channel) | |
4/ Polarity: Phase position choosen | |
5/ Gain: gain and input channel choose key (useful when adjust output channel, inefficacy when adjust input channel) | |
6/ Delay: Enter delay function | |
7/ Load: Transfer saved program. | |
8/ Save: Save revision program | |
9/ System: System setup | |
10/ MUTE/EDIT:Mute or Edit（press shortly enter mute function, red light display.press longest enter edit function, green light display.） | |
11/ Enter/Setup | |
